Brivis Heater Models, StarPro, Buffalo and Classic Explained

Brivis heater models span several decades and ranges, so Sydney homes hold everything from older Classic units to modern 6 star StarPro heaters. Knowing which one you have helps you follow the right reset steps, understand error codes and plan servicing or replacement. This guide walks through the main Brivis ducted gas heater ranges, the add on cooling and evaporative coolers, and how to find your model number.

Where do you find the model number?

Every Brivis heater has a data plate, usually on the cabinet near the gas connection or behind an access panel. It shows the model, serial number, gas type and capacity. External heaters are easiest to check from outside. For roof and underfloor heaters, do not climb in to read it. A technician can confirm the model during a visit, and your installation paperwork or manual may also list it.

What are the StarPro ranges?

The StarPro family is the core of the modern Brivis range.

StarPro 4 heaters reach a 4.1 star rating and are non condensing, available in internal and external models with capacities of roughly 21 to 35 kilowatts.

StarPro 5 heaters reach 5 stars, again non condensing, so they do not need a condensate drain. They come in internal and external versions in a similar capacity range.

StarPro 6 heaters reach 6 stars, the most efficient Brivis range, using a four pass heat exchanger and a modulating gas valve. Capacities run from about 15 to 35 kilowatts, with the 15 kilowatt model internal only. Condensing models such as the StarPro 6 need a condensate drain.

Older StarPro Plus and StarPro Max heaters are also common in Sydney homes. StarPro Max models, like the StarPro 6, have condensate drains.

What is the Buffalo range?

Buffalo heaters are external, weatherproof units. The BX3C is a 3 star model designed to replace older external heaters, with capacities of roughly 15.5 to 28 kilowatts. The BX5C is a 5 star upgrade for existing Buffalo installations, at roughly 20 to 30 kilowatts. Older BX3 and BX5 models also remain in service across many Sydney suburbs, often mounted on side walls or in back yards where they have run reliably for years.

What are the Classic ranges?

The Compact Classic is a compact, splittable indoor unit rated up to 3.5 stars, with capacities of roughly 15 to 30 kilowatts. The Wombat Classic, known by its 2PWN model codes, is a two piece unit with capacities of roughly 15.5 to 28 kilowatts. Classic models reset differently from StarPro heaters and run their fan at full speed whenever it runs.

What other models might you find?

Older homes may have upflow or downflow models, SP4 Universal models such as the SP415UN to SP435UN, or older SP5 and SP6 models with codes such as SP623IN or SP530EN. The letters often hint at internal or external installation and gas type. A technician can identify any model from its data plate and explain how it differs from newer ranges.

What is Brivis ICE add on cooling?

Brivis ICE is refrigerated cooling that shares the ducts of a compatible gas heater. Outdoor units and indoor coils cover roughly 13 to 22 kilowatts, with compatibility depending on the heater model. Brivis calls the combination DualComfort. Our cooling mode guide explains it.

Which evaporative coolers does Brivis make?

Brivis evaporative coolers include the slim Contour and the Advance and Advance Plus ranges, available in roof friendly colours such as Terra Red, Charcoal and Beige. Some models include the AquaSave water management system. Our evaporative cooling page explains how they work.

Which controllers go with which heaters?

Brivis heaters use the Networker or the newer Touch controller, along with programmable controllers and manual thermostats on some systems. ZonePlus zoning works with StarPro heaters produced after a certain date and selected Buffalo models. Controller and zoning compatibility depends on the heater model and age, so check before buying accessories.

How do models differ in warranty?

Most StarPro, Buffalo BX5C and Compact models carry five years parts and labour, while some Classic models list three years. The burner, heat exchanger and structural parts carry ten years. Brivis also offers a warranty extension through its Service Advantage program, which depends on scheduled services in years two, four, six and eight.

How do Brivis heater models differ in everyday use?

For owners, the biggest differences show up in comfort, noise and controls. Modulating models such as the StarPro 6 run gently for long periods and hold a steady temperature. Single stage models, including many Classic heaters, switch fully on and off, so you may notice more temperature swings. StarPro models offer up to sixteen fan speed settings, which installers can tune for quieter operation. Classic models run their fan at full speed whenever it runs.

Reset steps differ too. StarPro and Buffalo BX5 models use the reset key on the Networker, while Classic models use a wall control off and on sequence. Our reset guide covers both.

Why does the gas type matter?

Each heater is set up for natural gas or LPG, shown on its data plate. Some StarPro 6 models are also available for ULPG. A heater cannot switch gas types without a proper conversion by a licensed gas fitter. If you change your gas supply, check the heater compatibility first.

How do internal and external models compare?

Internal heaters sit in the roof, a cupboard or under the floor, protected from weather. External heaters sit outside and are easier to reach for servicing. Brivis notes that some internal units can be split into parts and lifted for easier handling, and selected models can be installed sideways in tight spaces. The right choice depends on the home.

What do the letters in model codes mean?

Brivis model codes often include letters that hint at the range and installation type, such as IN for internal and EN for external on many StarPro codes. Numbers often relate to the range and capacity. Suffixes may indicate variants. Rather than guessing, read the full code from the data plate and share it with us, ideally with a clear photo.

Which models suit replacement of older heaters?

Brivis designed the Buffalo BX3C to replace older external heaters and the BX5C as a 5 star upgrade for existing Buffalo installations. Internal StarPro models suit roof or underfloor replacements. A technician assesses the existing ducts, flue and gas supply before recommending a model. Our installation page explains the process.

How long are parts available?

Parts for current ranges are generally easier to find than for older models. For very old heaters, some parts may be scarce. When a repair needs a hard to find part, we explain the timeline and cost before ordering, and we discuss replacement if parts are no longer available.

Are all models safe to keep running?

Any Brivis heater, old or new, that is serviced regularly and shows no signs of combustion problems can keep running safely. Age alone is not a safety issue, but older heaters need closer inspection of the heat exchanger and flue during each service.

Which model suits which home?

As a broad guide, smaller homes and apartments with roof space often suit a smaller internal StarPro or a Compact Classic. Meanwhile, larger family homes usually need a higher capacity StarPro, often with zoning. In contrast, homes without roof or subfloor space, or homes replacing an older external unit, often suit the Buffalo range. Finally, households that want the lowest running costs usually choose the StarPro 6. However, the right choice always depends on a proper assessment of the home, so treat this as a starting point rather than a rule.

How do star ratings compare in practice?

According to Brivis, each step up in star rating means roughly ten percent lower annual energy use. Therefore, a 6 star heater uses noticeably less gas than a 3 star heater for the same warmth. However, the savings depend on how much you heat. For example, a household that runs the heater for long hours each winter gains more from high efficiency than one that heats only occasionally.

What do modulating models do differently?

Above all, modulating models adjust their output. Instead of firing at full power and stopping, they turn the flame down as the home warms. As a result, the temperature stays steadier, the heater runs more quietly and gas use falls once the home is warm. Furthermore, the fan can slow down with the flame, which reduces noise and draughts.

Do older models still deserve servicing?

Yes. In fact, older heaters benefit most from regular servicing, because years of dust and wear can hide early problems. Brivis recommends servicing at least every two years for all heaters. Moreover, Brivis notes that some of its earliest gas heaters are still running nearly 50 years on, which shows what careful maintenance can achieve.

How do you choose an evaporative cooler model?

First, consider the size of the home and the airflow needed. Next, consider the roof colour and profile, since the Contour offers a slimmer look. Then consider water management features such as AquaSave. Finally, think about local weather, because evaporative cooling suits drier areas best.

Which error codes apply to which models?

The owner manual groups error codes for StarPro Max, StarPro SP and Buffalo BX5 models. Overheat codes 40 to 43, ignition codes 46, 47 and 55, lockout code 50 and pressure switch code 56 all apply across those ranges. On StarPro Max and StarPro 6 models, code 56 can also relate to a blocked condensate drain. Classic models handle faults and resets differently. Our error code guide explains each code.

Which models support zoning?

ZonePlus supports up to four zones on StarPro heaters and selected Buffalo models. The ZonePlus manual notes it works with StarPro ducted gas heaters produced after a certain date, identified by serial number. Adaptive zoning, which helps the heater adjust to fewer open zones, applies to StarPro Max, StarPro SP and Buffalo BX5 models. Classic heaters can work with zoning arrangements but lack adaptive features. Our zoning guide explains more.

Which models support app control?

App control through the Rinnai Touch app requires a compatible controller and a wifi module. Newer heaters with the Touch controller are the most likely to support it. Older Networkers may not. A technician can check whether your heater can be upgraded.

How do you know your heater age?

The serial number on the data plate often helps identify the production period. Installation paperwork, previous service reports or the original purchase documents also help. Knowing the age matters for warranty, parts availability and replacement planning.

Can mixed systems work together?

Yes. Many homes run a Brivis gas heater for winter and a Brivis evaporative cooler for summer, each with its own ducts, sometimes controlled by the same Networker setup. Others combine a Brivis heater with ICE add on cooling through shared ducts. Each combination has its own care needs, which a technician can explain.

What should you do if you cannot find the model?

If the data plate is hard to reach or unreadable, look through your paperwork first. In addition, take photos of the heater cabinet, the controller and any labels you can safely see. Then share them with us when you call. Usually, those clues are enough to identify the range. Otherwise, the technician confirms the exact model on site during the first visit.

How do you book help for your model?

Call 02 9071 1142 or use our contact page, and tell us the model if you know it. Otherwise, describe the heater and where it is installed, and we will identify it on site.

Frequently asked questions

Where is the Brivis model number?

On the heater data plate, often near the gas connection or behind a panel.

Which Brivis heater is most efficient?

The StarPro 6, rated at 6 stars.

Which models need a condensate drain?

Condensing models such as the StarPro 6 and StarPro Max.

What is the Buffalo range?

External weatherproof heaters, including the BX3C and BX5C.

Does Brivis make add on cooling?

Yes. Brivis ICE shares the ducts of a compatible gas heater.

How do I book?

Call 02 9071 1142 or use our contact page.