Brivis Heater Steam From Flue, Normal Vapour or a Problem?

Brivis heater steam from flue outlets often alarms owners on cold, still mornings.

A white plume drifting from the roof or the side of an external heater looks like smoke at first glance. In nearly every case it is simply water vapour, a normal product of burning gas. The Brivis owner manual says flue vapour and a hot flue terminal are normal. This page explains why vapour forms, why some heaters make more of it and which signs do need a check.

Why does Brivis heater steam from flue outlets appear?

When natural gas or LPG burns, it produces carbon dioxide and water vapour. The water vapour leaves through the flue along with the other combustion gases. On cold days, that warm, moist air meets cold outside air, and the vapour condenses into tiny droplets you can see, much like your breath on a winter morning. The colder and stiller the air, the more visible the plume.

On warm days, the same vapour leaves the flue, but you rarely see it at all.

Is a hot flue terminal normal?

Yes. Combustion gases are hot, so the flue terminal warms up while the heater runs. The manual notes this is normal. Keep children, pets and flammable items away from external flue outlets, and never cover or block them.

Why do some heaters make more vapour?

High efficiency condensing heaters, such as the StarPro 6 and the older StarPro Max, extract so much heat from the flue gases that they run cooler. Cooler flue gases condense more readily, so you may see a larger, denser plume from these heaters. Inside the heater, some of that moisture condenses into liquid, which drains away through a condensate pipe.

Non condensing heaters such as StarPro 4 and StarPro 5 produce vapour too, but their hotter flue gases may show a smaller plume.

Does more vapour mean more efficiency?

Often, yes. A visible plume from a condensing heater shows it is extracting extra heat from the combustion gases rather than sending that heat out of the flue. That is part of how 6 star heaters achieve their rating.

When is vapour not normal?

Some signs do need attention.

  • Dark or black smoke rather than white vapour.
  • Soot or staining around the flue terminal.
  • A strong smell of fumes near the flue or inside the home.
  • Water dripping or pooling where it should not, near the heater or flue.
  • Vapour coming from somewhere other than the flue terminal.

If you notice any of these, turn the heater off and call us.

What about water dripping from the flue?

A small amount of moisture around a condensing heater flue can be normal in cold weather. However, a steady drip, ice forming on nearby surfaces or water running down walls suggests the flue may need checking. On condensing models, also check that the condensate drain outlet is clear. A blocked condensate drain can cause a pressure switch lockout with code 56.

Can vapour damage nearby surfaces?

Over many years, constant moisture from a flue can stain or mark nearby surfaces such as eaves, fences or paint. Installers place flues with required clearances to reduce this. If staining appears, mention it at the next service. A technician can check the flue position and terminal.

What if the plume blows back towards a window?

Flues must sit at set distances from windows, doors and other openings. If you notice flue vapour drifting into the home through a nearby window, keep that window closed while the heater runs and ask a technician to check the flue position. Renovations sometimes add windows or structures too close to an existing flue.

Why does the plume look bigger on some mornings?

Vapour visibility depends on the weather more than the heater. Cold, still, humid mornings make the biggest plumes, because the air cools the vapour quickly and holds it near the flue. On windy days, the wind disperses the vapour before it forms a visible cloud. On warm or dry days, the vapour stays invisible. So a sudden large plume on a frosty morning, from a heater that runs normally, is no cause for concern.

Can neighbours mistake the vapour for smoke?

Yes, and occasionally a neighbour may knock to say the roof is smoking. If the plume is white, wispy and disappears quickly, and the heater runs normally with no smell, it is vapour. If there is any doubt, turn the heater off and look again. True smoke is usually grey or dark, smells and does not vanish so quickly.

What is the difference between vapour and smoke?

Vapour is water droplets. It is white, has no smell beyond a faint warm air scent and evaporates within moments. Smoke contains particles from burning materials. It is grey or black, smells of burning and lingers. A properly running gas heater should never produce smoke from its flue. If you see smoke, turn the heater off and call us.

Does vapour mean the heater is wasting gas?

No. Vapour is a normal product of burning gas, whatever the efficiency. Condensing heaters may show more vapour precisely because they capture more heat, which means they waste less. The amount of visible vapour is not a guide to gas waste.

Why is there vapour from the heater cabinet itself?

On external heaters, the flue outlet is part of the cabinet, so vapour appears from the heater rather than a roof terminal. That is normal. Vapour from seams, panels or the base of the cabinet, rather than the flue outlet, is not normal and needs a check.

How does a blocked flue change the vapour?

A partly blocked flue may reduce the plume or make it come out unevenly. More importantly, it can stop the heater safely venting. The heater checks flue airflow before lighting, and a restriction often leads to lockouts. If the plume disappears while the heater seems to run, or combustion gases seem to spill near the heater, turn it off and call us.

Should the flue be cleaned?

Flues do not usually need routine cleaning like a fireplace chimney, because gas burns cleanly. However, they do need inspecting for nests, debris, damage and loose joints. That inspection is part of a service. Brivis recommends servicing at least every two years.

Where are Brivis flues usually located?

Internal heaters in roof spaces usually vent through a flue that passes up through the roof, ending in a terminal above the roof line. Internal heaters in cupboards or under floors may vent through a wall. External heaters, including Buffalo models and external StarPro units, have the flue outlet built into the cabinet. Each position follows installation rules about clearances from windows, doors, eaves and boundaries.

Knowing where your flue sits helps you check it from the ground and spot changes over time.

Can birds nest in the flue?

Yes, particularly in spring and summer when the heater sits idle. A nest can partly block the flue, and the heater may then show a pressure switch lockout when it starts in autumn. Look at the terminal from the ground before winter. If you see twigs or birds coming and going, ask a technician to clear it and consider a suitable terminal guard.

Does vapour cause rust or rot?

Over many years, repeated moisture near the flue can contribute to rust on metal roofing or staining on timber. Installers follow clearance rules to limit this. If you see rust spots or stains forming near the flue, mention them at the next service. Sometimes a different terminal or an extension can direct the vapour away from vulnerable surfaces.

What about condensate from condensing heaters?

Condensing heaters, such as the StarPro 6, produce liquid condensate inside the heater as well as vapour at the flue. That condensate drains through a pipe to a suitable outlet. It is mildly acidic, so it should drain to the right place rather than onto garden beds or paving that might stain. If you see condensate dripping somewhere unexpected, call us. Our water leaks guide explains more.

Can vapour freeze?

In most of Sydney, overnight temperatures rarely stay low enough for long enough to freeze flue vapour or condensate. In colder elevated suburbs, a little frost or ice may form near a condensing heater flue on the coldest mornings. That is usually harmless, but ice building up near the flue terminal or condensate outlet should be checked.

Should you stand near the flue?

Avoid standing in the plume. Although it is mostly water vapour, it also contains carbon dioxide and other combustion products, and it is hot near the terminal. Keep children and pets away from external flue outlets.

Can wind blow vapour back into the heater?

Strong wind can swirl flue gases around the terminal, and in unusual positions some gases may be drawn back toward air inlets. Heaters check flue airflow through the pressure switch, so poor venting often shows up as lockouts. If your heater locks out mainly on windy nights, ask a technician to look at the flue terminal type and position. A different terminal or a small change in position sometimes solves it.

What about vapour near outdoor living areas?

Many Sydney homes have pergolas, decks and outdoor kitchens added after the heater was installed. If one now sits close to an external heater or flue, the vapour may drift through the area. Besides being unpleasant, structures too close to a flue may breach clearance rules. A licensed gas fitter can assess whether the flue needs extending or relocating.

What about carbon monoxide?

Flue vapour itself is not a sign of carbon monoxide. However, a damaged flue, a cracked heat exchanger or poor combustion can let carbon monoxide into the home, and it has no smell. If anyone feels headaches, dizziness, nausea or unusual tiredness while the heater runs, turn it off, ventilate and seek medical advice. Regular servicing is the main protection, and some households also fit a carbon monoxide alarm.

How often should the flue be inspected?

Every service should include a flue check. Brivis recommends servicing at least every two years. If you notice changes, such as a new plume pattern, staining, rust, soot or lockouts, book a check sooner.

Is it safe to paint or clean around the flue?

You can clean around an external heater with the heater off and cool, but do not spray water into the flue outlet or cabinet openings. Avoid painting the flue terminal or nearby surfaces with the heater running, as paint fumes and heat do not mix. If roofers or painters will work near the flue, turn the heater off and ask them not to cover, bend or block it. Afterwards, check from the ground that the terminal looks as it did before.

What should you tell us if you are worried?

Describe the colour of the plume, any smell, where it comes from, whether it appears only in certain weather and whether the heater shows any codes. Photos of the flue terminal and any staining help a lot. With that information, we can advise whether a visit is needed and what to check first.

How do we check a flue?

A technician inspects the flue terminal for damage and blockages, checks the flue pipe for secure joints, confirms clearances and, on condensing models, checks the condensate drain. They also test the pressure switch and combustion fan, and confirm combustion is clean.

How do you book?

Call 02 9071 1142 or use our contact page. We can inspect the flue as part of a full service or as a separate check if something looks wrong.

Frequently asked questions

Is steam from a Brivis flue normal?

Yes. White vapour from burning gas is normal, especially on cold days.

Is a hot flue terminal normal?

Yes. The manual notes a hot flue terminal is normal.

Why does my StarPro 6 make more vapour?

Condensing models run cooler flue gases, which form more visible vapour.

When should I worry?

Dark smoke, soot, fume smells or water in the wrong places need a check.

Can a blocked condensate drain cause problems?

Yes. It can cause a code 56 lockout on condensing models.

How do I book?

Call 02 9071 1142 or use our contact page.

{“@context”:”https://schema.org”,”@type”:”HVACBusiness”,”@id”:”https://brivis.sydneyaircare.com.au/#business”,”name”:”Sydney Air Care, Brivis Service”,”url”:”https://brivis.sydneyaircare.com.au/”,”description”:”Brivis ducted heating and cooling repair, service and troubleshooting across Sydney. Independent service provider, not affiliated with Brivis.”,”areaServed”:[{“@type”:”City”,”name”:”Sydney”},{“@type”:”State”,”name”:”New South Wales”}],”parentOrganization”:{“@type”:”Organization”,”name”:”Sydney Air Care”,”url”:”https://sydneyaircare.com.au/”},”telephone”:”+61 2 9071 1142″} {“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”Is steam from a Brivis flue normal?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Yes. White vapour from burning gas is normal, especially on cold days.”}},{“@type”:”Question”,”name”:”Is a hot flue terminal normal?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Yes. The manual notes a hot flue terminal is normal.”}},{“@type”:”Question”,”name”:”Why does my StarPro 6 make more vapour?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Condensing models run cooler flue gases, which form more visible vapour.”}},{“@type”:”Question”,”name”:”When should I worry?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Dark smoke, soot, fume smells or water in the wrong places need a check.”}},{“@type”:”Question”,”name”:”Can a blocked condensate drain cause problems?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Yes. It can cause a code 56 lockout on condensing models.”}},{“@type”:”Question”,”name”:”How do I book?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Call 02 9071 1142 or use our contact page.”}}]}
Call 02 9071 1142