Book a Brivis Technician for Your Heater or Cooler

Ready to book a Brivis technician? Ring 02 9071 1142 and tell us what the heater or cooler is doing. Gas heaters bring a few extra considerations compared with ordinary appliances, such as gas safety, flue access and roof or subfloor installations, so a short chat before the visit pays off. Below you will find the gas safety rule that comes before everything else, the information worth gathering and how the day itself unfolds.

Which call comes first if gas is involved?

Gas safety always comes first. If you notice a rotten egg odour, leave light switches alone, avoid any flame, shut the meter valve if you can do it safely, open the house up and get everyone outside. From the footpath, ring your gas distributor emergency number or triple zero. We can help with repairs once the emergency crew has made things safe. Our gas smell guide goes through this in more detail.

Any other heater or cooler issue can come straight to us.

How do you book a Brivis technician with us?

Phone 02 9071 1142 during business hours. A real person takes the call, asks a handful of questions and offers you a time slot. Missed us? Leave your name, suburb and a sentence about the fault on voicemail, and we ring back. Prefer writing? Use the request form on this page and include as much detail as you like.

What information makes the visit quicker?

Gather whatever you can of the following.

  • Heater or cooler model, read from the data plate if it is safe to reach.
  • Exact number or wording shown on the Networker or Touch screen.
  • Heater location, whether roof, cupboard, subfloor or outside wall.
  • Whether the cooktop or hot water still works.
  • Roughly when the filter was cleaned and the heater last serviced.
  • Extras such as zones, Brivis ICE cooling or a rooftop evaporative cooler.

Missing a few of these is fine. Each extra clue simply narrows the search.

Is there anything worth trying beforehand?

A couple of minutes of owner checks can avoid a call out altogether. Vacuum or wash the return air filter, open a few more outlets and confirm gas reaches the cooktop. Then look for a tripped breaker and give the heater a single reset using our reset guide. If the fault survives all that, it genuinely needs a technician.

How does the day itself unfold?

Your booking is confirmed by phone or message. On the day, the technician rings when they set off. Once there, they start at the controller, read any message and then work outward, checking the filter, outlets and gas before opening the heater. Tests follow, aimed at whichever parts the symptoms implicate. You then hear what failed and what fixing it costs, and nothing proceeds until you agree.

What kinds of work can we take on?

Our technicians handle a broad range of Brivis jobs, including ignition faults, overheat codes, lockouts, fan and motor repairs, flue and condensate problems, duct and zone repairs, controller replacements, scheduled servicing, ICE cooling faults and leak repairs, evaporative cooler pumps and pads, plus replacement quotes. More detail sits on our repair, service, evaporative cooling and installation pages.

Where in Sydney do technicians travel?

Technicians travel across the greater Sydney area, from the beaches to the far west and from the upper north down to the south. See the areas page for regional detail, or simply ask when you ring.

What happens when it cannot wait?

Say so on the phone. During cold snaps, households with no heating and vulnerable members, such as the very young, the elderly or anyone unwell, move up the list wherever possible. While you wait, warm one room with a safe electric heater and keep its door shut.

What do you describe for each kind of fault?

Heater completely dead

Mention whether the screen glows, whether the heater makes any sound and whether the switchboard shows a tripped circuit.

Cold air blowing

Note whether continuous fan or cooling might be selected and whether you hear the burners light at all.

A number on screen

Quote it exactly, plus any scrolling words, and tell us what you tried since.

A single chilly room

Name the room and mention any recent roof work, renovation or furniture shuffle.

Odd sounds or smells

Describe the character and timing, and record a short clip if it is a noise.

Drips or stains

Say where, which system was running and whether rain played a part.

What does the technician carry?

Vans carry gas pressure gauges, leak detectors, electrical meters, cleaning kits and everyday spares such as igniters, sensors and filter media. Model specific items, such as control boards, are usually ordered after diagnosis, with the return visit included in your quote.

How long should you set aside?

Allow one to two hours for most services and straightforward repairs. Roof or subfloor heaters, duct work and rooftop coolers can take longer, and the technician keeps you posted as the job progresses.

How can you get the house ready?

Make a clear path to the heater, the roof hatch if relevant, the return grille and the wall controller. Shift stored boxes away from the heater, keep pets secure and pass on any parking, gate or building access details.

Can a phone call solve the problem?

Sometimes, yes. A surprising number of calls end with the heater running again after a quick conversation. A gas tap closed during plumbing work, a program stuck in its Sleep period, continuous fan switched on by a curious child or a filter packed with dog hair are all things we can talk you through. If the conversation points to a genuine fault, we book the visit there and then.

Which photos are worth taking?

A few phone photos save a lot of explaining. Snap the controller screen while it shows the message. Photograph the heater data plate if it is safely reachable, and the outside flue terminal from the ground. For leaks, capture the stain and the condensate outlet. For a cold room, a shot of the outlet and any furniture near it helps. Send them along when we confirm the booking.

How do roof and subfloor heaters change the booking?

Heaters tucked into roofs or subfloors need ladders, lighting and sometimes two people. Tell us how high the ceiling is near the manhole, whether the manhole is in a wardrobe or hallway and whether the subfloor access is cramped. That way the right equipment arrives and nobody wastes time.

What about LPG households?

If your home runs on bottled gas, mention it. LPG heaters use different settings from natural gas units, and cylinder levels, regulators and changeover valves all play a part in ignition faults. Check the cylinders before calling if you can, since an empty bottle is a common culprit on frosty mornings.

Can property managers and tenants book?

Yes. Agents can book on behalf of owners, and tenants can report faults through their agent. We confirm access times with whoever lives there, send the quote to whoever approves spending and forward the paperwork afterwards. Tenants should not arrange gas work without the owner or agent agreeing.

How do strata buildings work?

Apartment blocks sometimes require lift bookings, roof keys or a building manager present, particularly for rooftop coolers. Pass on those requirements early, and we will slot the visit around them.

What if the heater is still under warranty?

Have your purchase and installation documents handy. Most StarPro, Buffalo BX5C and Compact models carry five years parts and labour, with ten years on the burner, heat exchanger and structure. Warranty claims generally run through the manufacturer, and we can explain how that process works for your situation.

Can several systems be looked at together?

Absolutely. Plenty of Sydney homes combine a gas heater with a rooftop cooler or ICE cooling, and some have split systems too. Mention everything when you ring so a single visit covers as much as possible.

What happens after the job?

You receive an invoice listing the work and parts, plus a short summary of anything worth watching. If something seems off in the following days, ring us and we will come back to check. Keep the paperwork with your heater manual for warranty and future reference.

Do we remind you about servicing?

Brivis recommends servicing at least every two years, and many owners like a nudge. Tell us your preferred season when you book, and note the date in your manual or phone calendar so the next one does not slip past.

Why should you never open the heater while waiting?

It is tempting to take a look inside, especially if you are handy. However, the cabinet hides gas valves, burners, high voltage ignition parts and the sealed heat exchanger. Opening it can create a gas or electrical hazard, may void the warranty and often disturbs clues the technician needs. So leave the panels on, stick to the owner checks and let a licensed gas fitter do the rest.

How do you stay comfortable until we arrive?

In winter, gather the household in one room, close its door and use a safe portable electric heater or a reverse cycle split if you have one. Draw the curtains early and add an extra layer of bedding at night. Never bring outdoor gas heaters, barbecues or camp stoves indoors, since they can fill a room with dangerous fumes. In summer, if the cooler or ICE cooling has failed, close blinds on sunny windows, run fans and keep everyone well hydrated.

When is the best time to book servicing?

Heater servicing books up fast once the first cold change arrives, so autumn is the sweet spot. Rooftop evaporative coolers are best serviced in spring, before the first heatwave. Booking ahead means more choice of days and times.

How do we keep you updated?

We confirm every booking, ring when the technician is on the way and explain findings face to face before any repair. If a part has to be ordered, we tell you the expected wait and book the return visit as soon as it lands. You always know where things stand.

What makes a booking go smoothly?

Clear details, safe access and a little patience on the day. Have the model and code ready, clear the path to the heater and controller and let us know about pets and parking. With those in place, most visits run to time and many finish in one trip.

Is there anything we cannot help with?

We focus on Brivis heating and cooling. Gas supply faults in the street belong to your gas distributor, and major electrical faults in the switchboard may need an electrician. If your problem falls outside what we do, we will tell you who to call.

What does a first time caller usually ask?

New customers often ask whether the problem is serious, whether the heater is safe to use, roughly what it will cost and how soon someone can come. We answer each honestly. If the symptoms suggest a safety issue, we tell you to keep the heater off. Where they point to a simple fix, we may talk you through it. When a visit is needed, we explain the first visit cost and offer the earliest available time. There is never any pressure to book.

Is weekend or evening help available?

Availability varies through the year. Tell us your preferred times when you ring, and we will do our best to fit around work and school. Visits outside normal hours may carry a higher rate, which we mention before booking.

Ready to book?

Ring 02 9071 1142, or send your details through the form here. We look forward to getting your Brivis system running well again.

Frequently asked questions

Which number books a Brivis technician?

Phone 02 9071 1142.

What comes first if I smell gas?

Leave the home and ring your gas distributor emergency number or triple zero from outside.

Where is the model number printed?

On the heater data plate, usually near the gas connection.

Can you fix rooftop evaporative coolers?

Yes, including Contour and Advance models.

Will I get a price before work starts?

Yes. You approve the quote before any repair.

Do technicians cover my suburb?

We travel across greater Sydney. Ask when you ring.